Cladding Panels Contractors UK
Insulated sandwich panels, composite panels, cassette systems — whatever panel product your project calls for, we source it from approved manufacturers and install it ourselves, start to finish.
What Are Cladding Panels?
Cladding panels are pre-manufactured units fixed to a building’s structural frame to form its external skin — covering walls, and in some cases roofs, in a single controlled-factory product rather than built up on site sheet by sheet. They cover a wide range of constructions: insulated sandwich panels, composite (ACM) panels, solid aluminium panels and cassette systems.
Cladding panels are one of the most commonly specified external envelope solutions in the UK for industrial and commercial buildings. Factory manufacture means consistent quality, predictable performance data and — in the case of insulated panels — weatherproofing and thermal performance delivered in one fixing operation.
Cladding Panel Systems We Install
At Faclade, we supply and install a range of cladding panel systems to suit different project types, budgets and performance requirements. Our team manages the process — from system specification and material procurement through to professional installation and final sign-off.
Insulated Sandwich Panels
Twin-skin steel or aluminium panels with a continuous insulating core, delivering weatherproofing and thermal performance in a single fixing operation. Widely specified for warehouses, cold stores and logistics buildings.
Composite (ACM) Panels
Flat, rigid panels formed from two thin aluminium sheets bonded to a core material. Popular for a modern, uniform commercial finish, with fire-rated core options depending on the building and its fire strategy.
Solid Aluminium & Cassette Panels
Solid aluminium panels offer an A1 non-combustible classification for higher-risk buildings, while return-edged cassette panels give a premium, joint-free appearance with concealed fixings.
Cladding Panels and UK Building Regulations
Cladding panels sit at the centre of the fire safety scrutiny introduced across the UK following the Grenfell Tower fire. The panel type, core material and overall system have to match the building’s height, use class and fire strategy.
Key regulatory points that commonly apply to cladding panel projects:
- Non-combustible panels rated Class A1 or A2-s1,d0 are typically required on relevant buildings above certain height thresholds in England — the exact requirement depends on the building’s height, use and classification, so each project is assessed individually
- Panel systems on relevant buildings may need to be tested or assessed against BS 8414 and classified under BR 135
- Insulated sandwich panels are commonly specified with reference to BS EN 14509
- The Building Safety Act 2022 introduced new duties for building owners, developers and contractors on higher-risk buildings
At Faclade, every cladding panel installation is specified and installed with reference to current UK building regulations. We work alongside the project’s fire and design professionals, and provide the relevant system documentation and certification for the specification used.
Cladding Panel Installation Process
Our installation process follows a structured programme designed to deliver consistent quality and comply with CWCT (Centre for Window and Cladding Technology) standards on every project.
1. Site Survey & Specification
Our technical team visits the site to assess the structural substrate, building height, exposure conditions and access requirements. We produce a detailed specification document outlining the recommended panel system, fixing method, joint design and performance targets.
2. Material Procurement
We source cladding panels from approved UK and European manufacturers, ensuring full traceability and certification. Panel systems supplied by Faclade carry third-party certification from BBA (British Board of Agrément) or equivalent bodies.
3. Sub-frame or Rail Installation
Panels are fixed to a sub-frame or rail system attached to the building structure, designed to accommodate thermal movement and provide a level, weathertight fixing surface.
4. Panel Installation
Panels are installed to the manufacturer’s specification using concealed or visible fixing systems depending on the panel type and design intent. All joints are sealed or detailed to prevent water ingress while allowing for thermal movement.
5. Quality Inspection & Sign-off
Every Faclade installation undergoes a comprehensive quality inspection before handover. We provide full as-built documentation and system warranties, plus a fire safety certificate where the specification requires it.
Cladding Panel Cost Guide — UK 2026
Cladding panel costs vary depending on panel type, core material, building height, access requirements and project complexity. The figures below are indicative supply-and-install guide prices for typical UK commercial and industrial projects in 2026 — see the notes under the table for what’s included.
Why Choose Faclade for Cladding Panels?
- Full project management from specification to sign-off — one point of contact
- Specified and installed with reference to the Building Safety Act 2022 and Approved Document B
- Non-combustible panels available where a project’s height or fire strategy requires them
- BBA-certified panel systems with full traceability documentation
- Experienced installation teams with CSCS cards and relevant trade qualifications
- Comprehensive warranties covering both materials and workmanship
- Coverage across the UK and internationally
Cladding panel types we install
Insulated Sandwich Panels
Twin-skin panels with a continuous insulating core, installed in one operation. The standard choice for warehouses, cold stores and logistics buildings.
Aluminium Composite Panels
Flat, rigid ACM panels for a modern commercial finish. Fire-rated core options available depending on the building’s height and fire strategy.
Solid Aluminium Panels
Full A1 non-combustible classification with no organic content. Often specified for schools, hospitals and other higher-risk buildings.
Cassette Panel Systems
Return-edged panels with concealed fixing for a clean, joint-free appearance. A premium option for high-specification commercial facades.
Perforated Panels
Perforated metal or composite panels for solar shading, screening and decorative applications, with custom perforation patterns available.
Rainscreen Panel Systems
Panels fixed clear of the structural wall on a ventilated cavity, for superior moisture control and long-term durability on premium facades.
Cladding panel cost guide UK 2026
| System Type | Fire Rating | Supply Cost (per m²) | Installed Cost (per m²) | Best For |
|---|---|---|---|---|
| Insulated Sandwich Panel | A2-s1,d0 / B | £30 – £50 | £70 – £120 | Warehouses, cold stores |
| Aluminium Composite (ACM) | FR / A2-s1,d0 | £15 – £45 | £45 – £95 | Commercial facades* |
| Solid Aluminium Panel | A1 | £40 – £70 | £85 – £120 | Higher-risk buildings* |
| Cassette Panel System | A2 or FR | £35 – £55 | £80 – £115 | Premium commercial |
| Rainscreen Panel System | A2-s1,d0 | £40 – £70 | £85 – £140 | Retail, premium commercial |
* Suitability depends on the specific building’s height, use and fire strategy, confirmed on a project-by-project basis — see the regulations notes above. Prices are indicative supply-and-install guide prices for UK commercial and industrial projects in 2026, covering material and standard labour. They exclude VAT, scaffolding/access equipment, structural repairs and non-standard substructure work unless otherwise agreed. Final costs depend on building height, access requirements, panel specification and project complexity. Contact Faclade for a detailed project quotation.
Specified to current UK regulations
Every cladding panel project delivered by Faclade is specified and installed with reference to current UK building regulations and industry standards. We provide the relevant system documentation for the specification used on every installation.
Cladding panel questions answered
Ready to discuss your cladding panels project?
Our team will review your enquiry within one working day. A detailed specification and cost plan follows once we have your project drawings and information.