Metal Cladding Contractors UK
From profiled steel sheet to standing seam aluminium, our teams supply and install metal cladding across warehouses, factories and commercial buildings UK-wide — durable, fast to fit, and specified to match your building’s fire strategy.
What is Metal Cladding?
Metal cladding is an external wall or roof covering formed from steel, aluminium or zinc sheet, fixed to a building’s structure to provide weatherproofing, durability and a low-maintenance finish. It ranges from simple profiled sheet on industrial units to standing seam and cassette systems on commercial facades.
Metal is one of the most durable and cost-effective cladding materials available in the UK, with a typical service life of 30 years or more when specified with the correct coating for the site’s exposure conditions.
Metal Cladding Systems We Install
At Faclade, we supply and install a range of metal cladding systems to suit different project types, budgets and performance requirements. Our team manages the process — from system specification and material procurement through to professional installation and final sign-off.
Profiled Steel Sheet Cladding
Corrugated or trapezoidal steel sheet fixed directly to purlins or a sub-frame. The fastest and most cost-effective way to clad an industrial building, with Class A1 non-combustible ratings as standard.
Insulated Metal Wall & Roof Panels
Twin-skin steel panels with a continuous insulating core, combining weatherproofing and thermal performance in a single fixing operation. Widely specified for warehouses, cold stores and logistics buildings.
Standing Seam & Aluminium Cladding
Concealed-fix standing seam systems in aluminium, zinc or steel, giving a smooth, joint-free finish for commercial and architectural facades. A premium option where appearance is as important as performance.
Metal Cladding and UK Building Regulations
Steel and aluminium sheet cladding are inherently non-combustible, which is one reason metal remains a common choice on industrial buildings of any height. Where metal is used as part of an insulated or composite system, the full build-up still needs to match the building’s height, use class and fire strategy.
Key regulatory points that commonly apply to metal cladding projects:
- Solid steel and aluminium sheet cladding typically achieves a Class A1 non-combustible rating on its own
- Insulated metal panel systems are commonly specified with reference to BS EN 14509, with the core material determining the overall fire classification
- Metal systems on relevant buildings above certain height thresholds may still need to be assessed against BS 8414 and classified under BR 135, depending on the full build-up
- The Building Safety Act 2022 introduced new duties for building owners, developers and contractors on higher-risk buildings
At Faclade, every metal cladding installation is specified and installed with reference to current UK building regulations. We work alongside the project’s fire and design professionals, and provide the relevant system documentation for the specification used.
Metal Cladding Installation Process
Our installation process follows a structured programme designed to deliver consistent quality and comply with CWCT (Centre for Window and Cladding Technology) standards on every project.
1. Site Survey & Specification
Our technical team visits the site to assess the structural substrate, building height, exposure conditions and access requirements. We produce a detailed specification document outlining the recommended profile, gauge, coating and fixing method.
2. Material Procurement
We source steel, aluminium and zinc sheet from approved UK and European manufacturers, ensuring full traceability and certification on every coil and panel.
3. Purlin or Sub-frame Preparation
Metal sheet is fixed directly to purlins, or to a sub-frame where insulation or a ventilated cavity is required. Fixing centres are set to the manufacturer’s wind-load and exposure data for the site.
4. Sheet or Panel Installation
Sheets or panels are installed with correct overlaps, side laps and flashings to prevent water ingress, while allowing for thermal expansion across the run.
5. Quality Inspection & Sign-off
Every Faclade installation undergoes a comprehensive quality inspection before handover. We provide full as-built documentation and system warranties covering both the coating and the fixing system.
Metal Cladding Cost Guide — UK 2026
Metal cladding costs vary depending on material, profile, coating and whether the system is insulated. The figures below are indicative supply-and-install guide prices for typical UK commercial and industrial projects in 2026 — see the notes under the table for what’s included.
Why Choose Faclade for Metal Cladding?
- Full project management from specification to sign-off — one point of contact
- Specified and installed with reference to the Building Safety Act 2022 and Approved Document B
- Non-combustible metal systems suited to industrial buildings of any height
- Materials sourced from approved manufacturers with full traceability documentation
- Experienced installation teams with CSCS cards and relevant trade qualifications
- Comprehensive warranties covering both materials and workmanship
- Coverage across the UK and internationally
Metal cladding types we install
Profiled Steel Sheet
Corrugated or trapezoidal steel sheet cladding. The fastest, most cost-effective way to clad an industrial building.
Insulated Metal Panels
Twin-skin steel panels with a continuous insulating core, installed in one operation for warehouses and cold stores.
Standing Seam Aluminium
Concealed-fix standing seam cladding in aluminium or zinc for a smooth, joint-free architectural finish.
Metal Cassette Panels
Return-edged metal cassette panels with concealed fixing, giving a clean, modern commercial appearance.
Perforated Metal Screening
Perforated steel or aluminium panels for solar shading, plant screening and decorative facade elements.
Corrugated & Box Profile Sheet
Traditional corrugated or box profile steel sheet, still one of the most widely specified roof and wall claddings in UK industry.
Metal cladding cost guide UK 2026
| System Type | Fire Rating | Supply Cost (per m²) | Installed Cost (per m²) | Best For |
|---|---|---|---|---|
| Profiled Steel Sheet | Class A1 | £12 – £22 | £30 – £50 | Single-storey industrial |
| Insulated Metal Panel | A2-s1,d0 / B | £30 – £50 | £70 – £120 | Warehouses, cold stores |
| Standing Seam Aluminium | A1 | £45 – £75 | £95 – £140 | Architectural facades |
| Metal Cassette Panel | A1 | £35 – £55 | £80 – £115 | Premium commercial |
| Corrugated / Box Profile | Class A1 | £10 – £20 | £28 – £48 | Agricultural, industrial |
* Prices are indicative supply-and-install guide prices for UK commercial and industrial projects in 2026, covering material and standard labour. They exclude VAT, scaffolding/access equipment, structural repairs and non-standard substructure work unless otherwise agreed. Final costs depend on building height, access requirements, gauge and coating specification, and project complexity. Contact Faclade for a detailed project quotation.
Specified to current UK regulations
Every metal cladding project delivered by Faclade is specified and installed with reference to current UK building regulations and industry standards. We provide the relevant system documentation for the specification used on every installation.
Metal cladding questions answered
Ready to discuss your metal cladding project?
Our team will review your enquiry within one working day. A detailed specification and cost plan follows once we have your project drawings and information.